- How To Buy
- About Us
The DV1394-Pro does not have a Timecode output. The timecode is only read from RS-422 VTRs during encoding to a computer edit suite. The other way during decoding is not supported!
At present, only the C2-2000A series, C2-6000 series, C2-8000 series and the 1T-C2-750 and 1T-C2-760 units with both DVI inputs and outputs support HDCP in the CORIO range (units beginning 'C2').
For: C2-2000A series units, C2-6000 series units, C2-2375A These units, with version 368 or above firmware, now support HDMI inputs and outputs (where a DVI output connector is present). By default, the inputs are set to DVI mode - therefore to change an input to HDMI compatibility,
Applies to:All 1T-C2-XXX units that support scaling, plus C2-1000, C2-2000, C2-2000A, C2-3000, C2-4000, C2-5000, C2-6000, C2-7000 series 1. If input and output are progressive (not interlaced) and at similar frame rates:
Although this is in the 'Adjust outputs' menu, it is really part of the 'Adjust resolutions' data, and thus the unit first needs to be told the resolution number to adjust. First send the 'Image to adjust' command, so set the resolution number that needs the output type changing: